Oscillating blade Thin, sharp blade with minimal overset for cutting fine details and small radii. Pre-cut: 0.67 + (0.12 x AP) Recommended materials : • LeatherMachine compatibility and Manufacturer references :- ZÜND : Z204

Very thin blade with minimal overcut Specifically designed to cut small radii and intricate details in complex geometries. Long lifespan on rubber materials. Pre-cut: 1.2 + (0.11 x AP) Recommended materials : • Corrugated board; flute B, C, BC, EB, and E • Folding...

Identical to Z-DIA-11 but with both sides usable Pre-cut: 0.58xAP Post-cut: 0.58xAPMachine compatibility and Manufacturer references :- ESKO : BLD-DF213, G42441204- BLACKMAN & WHITE : BW13- IECHO : E13- DYSS : AGDYB140- ATOM : 01033925

Oscillating and drag blades. Blade designed for cutting thin materials, suitable for small radii Pre-cut: 1.4 + (0.18 x DP) Recommended materials : • Corrugated cardboard (7 mm) • PP honeycomb sheets • Felt • FoamMachine compatibility and Manufacturer references :- ZÜND : Z104

Blade for light and flexible materials. Exerts low drag force, but has a larger offset Pre-cut: 1xAP Recommended materials : • Corrugated plastic • PP hollow sheets • Light foam • PVC banners • Paper • Polyester fabric • TarpaulinMachine compatibility and Manufacturer references...

Centered, asymmetric drag blade. Asymmetric edge with centered tip: No offset No wedging effect when cutting on the smooth side, preventing material displacement or lifting Ideal for printed documents, preventing color fragmentation. Equivalent to the Z-DIA-11, but with the edge ground to 0.64 mm....

Robust and versatile blade, thinner and producing only minimal drag for large radii. Pre-cut: 1xAP Recommended materials : • Paper • Polyester fabric • Cardstock • Tarpaulin • Plastic filmMachine compatibility and Manufacturer references :- ZÜND : W9

Robust and versatile double-edged blade Pre-cutting: 1.73xAP Post-cutting: 1.73xAP Recommended materials : • Reinforced PVC • Polyester fabric • Paper • Cardboard model • Tarpaulin materialMachine compatibility and Manufacturer references :- ZÜND : W8

Robust and versatile blade that exerts low drag for large radii. Pre-cut: 1.43xAP Recommended materials / • Reinforced PVC • Polyester fabric • Paper • Pattern cardboard • Tarpaulin materialMachine compatibility and Manufacturer references :- ZÜND : W7

Robust and versatile blade that generates only minimal drag for large radii. Pre-cut: 1.73xAP Recommended materials : • Paper • Polyester fabric • Cardstock • Tarpaulin • Plastic filmMachine compatibility and Manufacturer references :- ZÜND : W6- ESKO : BLD-KC154, G42458349

Very stable double-edged blade, ideal for cutting small numbers and small-sized letters. Pre-cut: 1.73xAP Post-cut: 1.73xAP Recommended materials : • Self-adhesive vinyls • Masking filmMachine compatibility and Manufacturer references :- ZÜND : W5

Similar to the Z-DIA-1 model, but particularly suitable for cutting harder adhesive sheets, such as reflective and thick vinyl, since its edge design is characterized by generating lower drag force. Pre-cut: 1.43xAP Recommended materials : • Self-adhesive film • Magnetic sheet • Reflective sheet...

Hard metal blade for cutting all standard self-adhesive vinyls. Round drag blade for self-adhesive vinyls, masking film, cardstock, pattern materials. Its cutting geometry is designed to facilitate vinyl weeding operations and ensure proper separation between the adhesive and the backing. Pre-cut: 1.43xAP Recommended materials...

Blade developed for cutting various tough and rigid materials Similar to SR-DIA-8160 but with a smaller cutting angle, resulting in greater overcut on thicker materials Overcut value: 4 mm Pre-cut: 0.84 x AP Recommended materials : • Corrugated plastic • Magnetic lenticular panel •...

Single-edged blade specially designed for cutting flexible and thin materials. Pre-cutting: 0.84xAP Recommended materials : • Adhesive vinyl • Corrugated plastic • Foam board (PUR) • PVC • Leather • Expanded PVC (Forex®, Sintra®) • Polyester sheet • Folding carton • Corrugated board •...

Blade designed for cutting various tough and rigid materials Overcut value: 4 mm Pre-cut: 0.58xAP Recommended materials : • Corrugated plastic • Magnetic lenticular panel • Foam board (PUR) • Expanded PVC (Forex®, Sintra®) • Magnetic sheet • PP hollow sheets • Corrugated cardboard...

Blade with special geometry designed for very good cutting quality in foam core materials. Overcut value: 4 mm Pre-cut: 0.84 x AP Recommended materials : • Corrugated cardboard • Foam board (PUR) • Lenticular panel • Expanded PVC (Forex®, Sintra®) • Foam with paper...

Blade with highly stable geometry delivers maximum performance and cutting quality in corrugated and other rigid plastics Overcut value: 4 mm Pre-cut: 0.45xAP Recommended materials : • Corrugated plastic • Foam board (PUR) • Lenticular panel • Expanded PVC (Forex®, Sintra®)Machine compatibility and Manufacturer...

Blade for 15 and 20 mm foam panels Usable only with high-frequency knife tools or with any modules having a stroke of at least 1.2 mm. Thinner blade for finer cuts and reduced overlap. Minimizes material displacement along curved cuts. Reduces load on the...

For oscillating cutting with high-frequency knife tools. Pre-cut: 0.58xAP Recommended materials : • Sealing materials • Resistant gasket materials • Mesh-reinforced graphiteMachine compatibility and Manufacturer references :- ESKO : BLD-SR6242, G42460964