Milling
-
Family 4053This range’s geometry has been specially developed to produce a better surface finish in PMMA, Polycarbonate, PA6, Corian and Compact laminates. Smooth and polished flute, limited built-up edge effects. Upcut tool, upwards removal of chips More resistant to abrasion. When possible, select short cutters...4053 - Single-tooth, high-efficiency cutters
- Regular price
- From 20,91 €
-
Family 4001XRange specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type ACM and TAC Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Stub cutter series, high rigidity Improves surface finishes, Longer service life of the...4001X - Coated, single-tooth stub cutters with right-hand helix for aluminium
- Regular price
- From 24,41 €
-
Family 4001NHCRange specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type ACM and TAC Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Stub cutter series, high rigidity Improves surface finishes, Longer service life of the...4001NHC - Coated, single-tooth stub cutters with right-hand helix for aluminium
- Regular price
- From 24,86 €
-
Family 4030Compression cutters for the contour milling of wooden boards The double-helix configuration - producing an upcut at the tip and then a downcut - prevents delamination of the two faces of the material The cutting geometry allows high-speed machining and a perfect surface finish....4030 - Coated compression cutters - WOODSPEED
- Regular price
- From 63,09 €
-
Family 4023NHCSpecific range for non-ferrous metals (aluminium, etc.) Right-hand helix, rising chips. Polyglazed flute and sharpening, limited chip sticking. Coated Plus version - Exists without coating This coating allows lubrication-free machining Greater resistance to abrasion. AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The...4023NHC - Two-tooth cutters with left-hand helix
- Regular price
- From 26,33 €
-
Family 4023Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Uncoated cutter, lubrication recommended. AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at...4023 - Single-tooth cutters with right-hand helix for aluminium
- Regular price
- From 21,14 €
-
Family 4015Cutters derived from the 4013 but with two teeth Smooth and polished flute, limited built-up edge effects Improves the surface finish when used on foamed materials and woods compared with a one-flute cutter. Upcut tool, upwards removal of chips. AVAILABLE IN RINGED VERSION FOR...4015 - Two-tooth cutters with right-hand helix
- Regular price
- From 26,89 €
-
Family 4002Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type TAC and ACM Smooth and polished flute, limited built-up edge effects Coated cutter, for use without lubrication, AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring...4002 - Single-tooth stub cutters with left-hand helix for aluminium
- Regular price
- From 30,92 €
-
Family 4050Range specifically for HPL (Trespa©, Fundermax©) Upcut tool, upwards removal of chips Chip breaker to improve ventilation and reduce heating. Coating on demand. The use of a coating extends the service life (consult us for details). AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6...4050 - Three-tooth cutters for high-pressure laminates (HPL)
- Regular price
- From 55,11 €
-
Family 4001Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type TAC and ACM. Smooth and polished flute, limited built-up edge effects. Upcut tool, upwards removal of chips. Stub cutter series, high rigidity Improves surface finishes, Longer service life of the...4001 - Single-tooth stub cutters with right-hand helix for aluminium
- Regular price
- From 18,13 €
-
Family 4014Cutters derived from the 4012 but with two teeth Smooth and polished flute, limited built-up edge effects Improves the surface finish when used on foamed materials and woods compared with a one-flute cutter. Downcut tool, downwards removal of chips Workpieces held better due...4014 - Two-tooth cutters with left-hand helix
- Regular price
- From 26,89 €
-
Family 2352XCoated, three-flute cutters for machining metals Particularly suited to the machining of steel-faced composite panels (such as Steelbond© or Kömasteel©). AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at the end of the usual reference. Example:...2352X - Coated, three-tooth cutters for steel
- Regular price
- From 48,02 €
-
Family 4044Very good surface finish solid carbide, High rigidity AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at the end of the usual reference. Example: Standard part no. without ring: 4044--10P0020-090 Part no. with ring: 4044--10P0020-090-B Lead...4044 - Cutters for slot cutting - folding - chamfering
- Regular price
- From 83,95 €
-
Family 4040Cutters for cutting slots - folding Specially designed for ACM and TAC ( Dibond©, Alucobond© ) Coating on demand.4040 - Slot cutting - folding cutters
- Regular price
- 102,64 €
-
Family 4022Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Downcut tool, downwards removal of chips Workpieces held better due to the downwards force. Limits the delamination of the upper face. Suited to thin materials. Milling thermoformed...4022 - Single-tooth cutters with left-hand helix for aluminium
- Regular price
- From 21,14 €
-
Family 4023XSpecific range for non-ferrous metals (aluminium, etc.) Right-hand helix, rising chips. Polyglazed flute and sharpening, limited chip sticking. Standard coated version - Available uncoated This coating allows lubrication-free machining AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a...4023X - Two-tooth cutters with left-hand helix
- Regular price
- From 27,04 €
-
Family 2345**Multi-material **and multi-application technical solid carbide cutter Variables helixes and staggered teeth Coated : AlCrN-C Right-handed helix : 37° and 40° 4 teeth, 2 of which are "overlapping"2345 - 4-teeth coated milling cutter
- Regular price
- From 26,12 €
-
Family 40522-tooth milling cutter specifically for soft plastics: PVC, PP, PEHD, Foamlite, Nylon, … Polyglazed flute and sharpening, limited chip sticking. High cutting speed. Quality surface finish on edges and pocket bottom. Right-hand helix, rising chips.4052 - 2-tooth milling cutter for soft plastics
- Regular price
- From 31,42 €
-
Family 4041Cutters for slot cutting - folding Specially designed for ACM and TAC ( Dibond©, Alucobond© ) Very good surface finish. Improves the evacuation of chips. Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Coating on demand. Machining of...4041 - Conical, one-tooth cutters for cutting slots - folding
- Regular price
- From 42,83 €
-
Family 4203Range specifically for non-ferrous metals (aluminium, brass, copper, etc.). Also recommended for Dibond© type TAC and ACM Cuts out and chamfers the material as a single operation. CAUTION: ensure that the material is flat! Uncoated cutter; lubrication is strongly recommended when used on aluminium....4203 - Single-tooth cutter with chamfer for aluminium
- Regular price
- 43,78 €
Les fraises carbure de Diager Industrie sont des outils de coupe de haute qualité, fabriqués à partir de carbure de tungstène ultra-résistant. Leur conception précise et leur revêtement spécial garantissent une durabilité exceptionnelle et une performance de coupe optimale. Ces fraises sont utilisées dans une variété d'applications telles que l'usinage de métaux, le travail du bois, la gravure, le plastique et bien plus encore. Leur géométrie spéciale permet une évacuation efficace des copeaux, assurant des résultats propres et précis. En somme, les fraises carbure de Diager Industrie sont des outils polyvalents et fiables, adaptés à une multitude de tâches d'usinage et de coupe dans divers domaines industriels et artisanaux.
DÉCOUVREZ TOUS LES TYPES DE MATÉRIAUX USINÉS PAR NOS FRAISES CARBURE :
- Découpe et usinage des plastiques
- Découpe et usinage des aluminiums
- Découpe et usinage du bois
- Découpe et usinage du Dibond®
- Découpe et usinage du Corian
- Découpe et usinage du HPL et Trespa
- Découpe et usinage de mousses
- Découpe et usinage du caoutchouc
- Découpe et usinage des aciers
- Découpe et usinage du Kevlar®
- Découpe et usinage du Fenix®
- Découpe et usinage du PVC alvéolaire
- Découpe et usinage de l’Akilux®
- … et bien d’autres matériaux spécialisés