Grooving
-
Family 4053This range’s geometry has been specially developed to produce a better surface finish in PMMA, Polycarbonate, PA6, Corian and Compact laminates. Smooth and polished flute, limited built-up edge effects. Upcut tool, upwards removal of chips More resistant to abrasion. When possible, select short cutters...4053 - Single-tooth, high-efficiency cutters
- Regular price
- From 20,91 €
-
Family 4001NHCRange specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type ACM and TAC Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Stub cutter series, high rigidity Improves surface finishes, Longer service life of the...4001NHC - Coated, single-tooth stub cutters with right-hand helix for aluminium
- Regular price
- From 24,86 €
-
Family 4030Compression cutters for the contour milling of wooden boards The double-helix configuration - producing an upcut at the tip and then a downcut - prevents delamination of the two faces of the material The cutting geometry allows high-speed machining and a perfect surface finish....4030 - Coated compression cutters - WOODSPEED
- Regular price
- From 63,09 €
-
Family 4023NHCSpecific range for non-ferrous metals (aluminium, etc.) Right-hand helix, rising chips. Polyglazed flute and sharpening, limited chip sticking. Coated Plus version - Exists without coating This coating allows lubrication-free machining Greater resistance to abrasion. AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The...4023NHC - Two-tooth cutters with left-hand helix
- Regular price
- From 26,33 €
-
Family 4015Cutters derived from the 4013 but with two teeth Smooth and polished flute, limited built-up edge effects Improves the surface finish when used on foamed materials and woods compared with a one-flute cutter. Upcut tool, upwards removal of chips. AVAILABLE IN RINGED VERSION FOR...4015 - Two-tooth cutters with right-hand helix
- Regular price
- From 26,89 €
-
Family 4002Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type TAC and ACM Smooth and polished flute, limited built-up edge effects Coated cutter, for use without lubrication, AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring...4002 - Single-tooth stub cutters with left-hand helix for aluminium
- Regular price
- From 30,92 €
-
Family 4013SCutters derived from the 4013 but with flat for finish Smooth and polished flute, limited built-up edge effects Improves the surface finish at the bottom of the pocket Upcut tool, upwards removal of chips. AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The...4013S - Single-tooth cutters with right-hand helix with flat for finish
- Regular price
- From 26,72 €
-
Family 4014Cutters derived from the 4012 but with two teeth Smooth and polished flute, limited built-up edge effects Improves the surface finish when used on foamed materials and woods compared with a one-flute cutter. Downcut tool, downwards removal of chips Workpieces held better due...4014 - Two-tooth cutters with left-hand helix
- Regular price
- From 26,89 €
-
Family 4001Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type TAC and ACM. Smooth and polished flute, limited built-up edge effects. Upcut tool, upwards removal of chips. Stub cutter series, high rigidity Improves surface finishes, Longer service life of the...4001 - Single-tooth stub cutters with right-hand helix for aluminium
- Regular price
- From 18,13 €
-
Family 4050Range specifically for HPL (Trespa©, Fundermax©) Upcut tool, upwards removal of chips Chip breaker to improve ventilation and reduce heating. Coating on demand. The use of a coating extends the service life (consult us for details). AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6...4050 - Three-tooth cutters for high-pressure laminates (HPL)
- Regular price
- From 55,11 €
-
Family 4044Very good surface finish solid carbide, High rigidity AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at the end of the usual reference. Example: Standard part no. without ring: 4044--10P0020-090 Part no. with ring: 4044--10P0020-090-B Lead...4044 - Cutters for slot cutting - folding - chamfering
- Regular price
- From 83,95 €
-
Family 4001NHC TYPE ZUNDRINGED CUTTER FOR ZÜND WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type ACM and TAC Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Stub cutter series, high rigidity Improves...4001NHC TYPE ZUND - Coated, ringed single-tooth stub cutters with right-hand helix for aluminium Zund machine compatible
- Regular price
- From 41,30 €
-
Family 4061Gamme spécifique pour les mousses en version longue. Fraisage et rainurage dans les mousses Polyéthylènes, élastomère thermoplastique, polyvinyle…. ainsi que le PVC expansé. Goujure et affûtage polyglaces, collage copeaux limité. Hélice à droite, copeaux remontants.4061 - Fraise 3 dents longue pour mousse
- Regular price
- From 36,66 €
-
Family 4023XSpecific range for non-ferrous metals (aluminium, etc.) Right-hand helix, rising chips. Polyglazed flute and sharpening, limited chip sticking. Standard coated version - Available uncoated This coating allows lubrication-free machining AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a...4023X - Two-tooth cutters with left-hand helix
- Regular price
- From 27,04 €
-
Family 4022Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Downcut tool, downwards removal of chips Workpieces held better due to the downwards force. Limits the delamination of the upper face. Suited to thin materials. Milling thermoformed...4022 - Single-tooth cutters with left-hand helix for aluminium
- Regular price
- From 21,14 €
-
Family 2345**Multi-material **and multi-application technical solid carbide cutter Variables helixes and staggered teeth Coated : AlCrN-C Right-handed helix : 37° and 40° 4 teeth, 2 of which are "overlapping"2345 - 4-teeth coated milling cutter
- Regular price
- From 22,52 €
-
Family 4045Creasing cutter - special high speed bending ACM, TAC (DIBOND, ALUCOBOND) Very good surface condition Improved chip evacuation High working speed Propeller on the right, rising chips Coating on request Machining of non-ferrous materials with coolant or coating4045 - High speed two-tooth conical creasing - folding cutter
- Regular price
- From 89,96 €
-
Family 4203Range specifically for non-ferrous metals (aluminium, brass, copper, etc.). Also recommended for Dibond© type TAC and ACM Cuts out and chamfers the material as a single operation. CAUTION: ensure that the material is flat! Uncoated cutter; lubrication is strongly recommended when used on aluminium....4203 - Single-tooth cutter with chamfer for aluminium
- Regular price
- 43,78 €
-
Family 4120Straight-fluted cutters No chip removal direction. Used mainly for wood. This cutter may also be used to produce a finished surface on certain thermoplastics, with a final cut of a few hundredths of a millimetre. AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK....4120 - Straight, two-tooth cutters
- Regular price
- From 43,63 €
-
Family 4041Cutters for slot cutting - folding Specially designed for ACM and TAC ( Dibond©, Alucobond© ) Very good surface finish. Improves the evacuation of chips. Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Coating on demand. Machining of...4041 - Conical, one-tooth cutters for cutting slots - folding
- Regular price
- From 42,83 €
Les fraises Diager Industrie sont idéales pour le rainurage de divers matériaux. Leur conception robuste et leur géométrie de coupe précise permettent d'obtenir des rainures nettes et uniformes, qu'il s'agisse de métaux, de bois, de plastiques ou de composites. Avec les fraises Diager, le rainurage devient rapide, précis et efficace, offrant des résultats de qualité professionnelle pour une large gamme d'applications industrielles et artisanales.
DÉCOUVREZ TOUS LES TYPES DE MATÉRIAUX USINÉS PAR NOS FRAISES CARBURE :
- Découpe et usinage des plastiques
- Découpe et usinage des aluminiums
- Découpe et usinage du bois
- Découpe et usinage du Dibond®
- Découpe et usinage du Corian
- Découpe et usinage du HPL et Trespa
- Découpe et usinage de mousses
- Découpe et usinage du caoutchouc
- Découpe et usinage des aciers
- Découpe et usinage du Kevlar®
- Découpe et usinage du Fenix®
- Découpe et usinage du PVC alvéolaire
- Découpe et usinage de l’Akilux®
- … et bien d’autres matériaux spécialisés