10-sided rotary blade Ø25 similar to ZDIA-51 and Z-DIA-52, but with a smaller offset and higher cutting force. Recommended materials : • Textiles • Technical textiles • Polyester fabric • Carbon fiber • Glass fiber • Aramid fiberMachine compatibility and Manufacturer references :- ZÜND...

Double-edged flat drag blade with a centered tip, for fibrous and less hard materials. This blade offers similar properties to the Z-DIA-11. Pre-cut: 0.58xAP Post-cut: 0.58xAP Recommended materials : • Carpet • Tarp materialMachine compatibility and Manufacturer references :- ZÜND : Z44- IECHO :...

Very stable double-edged blade, ideal for cutting small numbers and small letters. Pre-cut: 1.43xAP Post-cut: 1.43xAP Recommended materials : • Self-adhesive vinyls • Masking filmMachine compatibility and Manufacturer references :- ZÜND : Z3- ESKO : BLD-KC103, G42458323- BLACKMAN & WHITE : BW Kiss Cut...

Blade with a narrow blade geometry and low offset very stable and robust, suitable for cutting small radii and complex details in intricate geometries Similar to the Z-DIA-20, but more robust and with a larger offset. Pre-cut: 1.2 +(0.2xAP) Recommended materials : • Corrugated...

Blade similar to the Z-DIA20 but with a longer cutting length. Very thin blade with minimal overcut. Specifically designed for cutting small radii and intricate details in complex geometries. Pre-cut: 1.6 + (0.11 x AP) Recommended materials : • Corrugated cardboard • Foam board...

Identical to Z-DIA-10 but with both sides usable Pre-cut: 0.84 x AP Post-cut: 0.84 x APMachine compatibility and Manufacturer references :- ZÜND : Z12 (Z10 X 2)- ESKO : BLD-DF212, G42441196- BLACKMAN & WHITE : BW12- IECHO : E12- DYSS : AGDYB140

Single-edged blade similar to the SR-DIA-6150, but with a 60° cutting angle, resulting in less overcut. Pre-cut: 0.84xAP Recommended materials : • Adhesive vinyl • Corrugated plastic • Foam board (PUR) • Lenticular panel • Expanded PVC (Forex®, Sintra®) • Magnetic sheet • Polyester...

Tangential blade designed for kiss-cutting and full-cutting of adhesive vinyls. Precise depth control Accurate cuts for easy weeding Cuts a wide variety of vinyl Recommended materials: • Paper Machine compatibility and Manufacturer references :- SUMMA : 390-550

ER spring collets DIN 6499 - ISO 15488

Brazed carbide insert drill bit 6° cut 90° tip angle Right cutting : 6° Sharpening : AF1 Body : High-speed steel - Carbide insert K20

Creasing cutter - special high speed bending ACM, TAC (DIBOND, ALUCOBOND) Very good surface condition Improved chip evacuation High working speed Propeller on the right, rising chips Coating on request Machining of non-ferrous materials with coolant or coating

Blade for 45° cutting. Very stable and with a long service life. Recommended materials : • Corrugated cardboard • Corrugated cardboard - BCA flute • Sandwich board • Light foam • Carpet • Corrugated plasticMachine compatibility and Manufacturer references :- ZÜND : Z71- IECHO...

Blade for a 45° cutting. Recommended materials : • Corrugated cardboard • Corrugated cardboard - BCA flute • Sandwich board • Light foam • Carpet • Corrugated plasticMachine compatibility and Manufacturer references :- ZÜND : Z70- IECHO : E70

Blade for sandwich materials Identical to Z-DIA-68 but longer Pre-cut: 1.7 + (0.11 x AP) Recommended materials : • Sandwich panel • Honeycomb • Corrugated cardboard • Corrugated plasticMachine compatibility and Manufacturer references :- ZÜND : Z69

Blade for sandwich materials Pre-cutting: 1.9 + (0.12 x AP) Recommended materials : • Sandwich panel • Honeycomb • Corrugated cardboard • Corrugated plasticMachine compatibility and Manufacturer references :- ZÜND : Z68

Oscillating blade with small pre-cut. Similar to the Z-DIA-62, but longer and slightly less stable. Pre-cut: 0.8 + (0.12 x AP) Post-cut: 1.2 mm Recommended materials : • Foam • Insulating materials.Machine compatibility and Manufacturer references :- ZÜND : Z63

Carbide oscillating blade with small pre-cut, similar to the Z-DIA-41 but with greater overall length and cutting length. Pre-cut: 0.8 + (0.21 x AP) Post-cut: 1.2 mm Recommended materials : • Textiles, nylon fabric, polyester fabric • Aramid fiber • Carbon fiber • Glass...

Oscillating blade with very robust and durable geometry. Pre-cut: 2.5 + (0.15 x AP) Recommended materials : • Corrugated plastic • Corrugated cardboard • Folding carton • Sandwich panel • Felt • Foam • Saddle leather, leather • Rubber • Corrugated plastic • PP...

High tenacity carbide blade, developed for cutting hard and resistant materials. Similar to the Z-DIA-21 but 1.5 mm thick. Pre-cut: 2.2 + (0.15xAP) Recommended materials : • Corrugated plastic • Corrugated cardboard • Folding carton • Sandwich panel • Felt • Foam • Saddle...

Knife for cutting all standard self-adhesive vinyls. Stable and long-lasting knife Pre-cut: 1xAP Recommended materials : • Vinyl • Self-adhesive vinyls • Magnetic vinyls • Reflective vinyls • Masking vinyls • Magnetic sheet • Plastic – PC • Banner materialMachine compatibility and Manufacturer references...