Asymmetric-edge blade Produces a slight overcut Recommended for various thin, flexible, or rigid materials such as cardboard, vinyl, leather, plastics, paper, etc. Optimized for clean cuts, pushing burrs to one side while ensuring optimal cutting quality Requires control of cutting direction Pre-cut: 0.58xAP Recommended...

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Cutters derived from the 4013 but with two teeth Smooth and polished flute, limited built-up edge effects Improves the surface finish when used on foamed materials and woods compared with a one-flute cutter. Upcut tool, upwards removal...

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type TAC and ACM Smooth and polished flute, limited built-up edge effects Coated cutter, for use without lubrication, Lead time: 48 hours

Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Downcut tool, downwards removal of chips Workpieces held better due to the downwards force. Limits the delamination of the upper face. Suited to thin materials. Milling thermoformed...

Solid carbide drill 3xD Central lubrification Sharpening AF24 Attachment : cylindrical ALTIN-SIT coating

Range specifically for plastics Cuts out and chamfers the material as a single operation CAUTION: Ensure that the material is flat!

Right hand cut Right-handed helix 25° Number of teeth 4 Clearance 7° Cut 5° Carbide MK15 **Cylindrical attachment, flat on request

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type TAC and ACM Smooth and polished flute, limited built-up edge effects Coated cutter, for use without lubrication, Lead time: 48 hours

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Straight-fluted cutters No chip removal direction. Used mainly for wood. This cutter may also be used to produce a finished surface on certain thermoplastics, with a final cut of a few hundredths of a millimetre. Lead time:...

Centered, asymmetric drag blade. Asymmetric edge with centered tip: No offset No wedging effect when cutting on the smooth side, preventing material displacement or lifting. Ideal for printed documents, preventing color fragmentation. Equivalent to the Z-DIA-10, but with the edge ground to 0.64 mm....

10-sided rotary blade Ø25 similar to ZDIA-51 and Z-DIA-52, but with a smaller offset and higher cutting force. Recommended materials : • Textiles • Technical textiles • Polyester fabric • Carbon fiber • Glass fiber • Aramid fiberMachine compatibility and Manufacturer references :- ZÜND...

Double-edged flat drag blade with a centered tip, for fibrous and less hard materials. This blade offers similar properties to the Z-DIA-11. Pre-cut: 0.58xAP Post-cut: 0.58xAP Recommended materials : • Carpet • Tarp materialMachine compatibility and Manufacturer references :- ZÜND : Z44- IECHO :...

Very stable double-edged blade, ideal for cutting small numbers and small letters. Pre-cut: 1.43xAP Post-cut: 1.43xAP Recommended materials : • Self-adhesive vinyls • Masking filmMachine compatibility and Manufacturer references :- ZÜND : Z3- ESKO : BLD-KC103, G42458323- BLACKMAN & WHITE : BW Kiss Cut...

Blade with a narrow blade geometry and low offset very stable and robust, suitable for cutting small radii and complex details in intricate geometries Similar to the Z-DIA-20, but more robust and with a larger offset. Pre-cut: 1.2 +(0.2xAP) Recommended materials : • Corrugated...

Blade similar to the Z-DIA20 but with a longer cutting length. Very thin blade with minimal overcut. Specifically designed for cutting small radii and intricate details in complex geometries. Pre-cut: 1.6 + (0.11 x AP) Recommended materials : • Corrugated cardboard • Foam board...

Identical to Z-DIA-10 but with both sides usable Pre-cut: 0.84 x AP Post-cut: 0.84 x APMachine compatibility and Manufacturer references :- ZÜND : Z12 (Z10 X 2)- ESKO : BLD-DF212, G42441196- BLACKMAN & WHITE : BW12- IECHO : E12- DYSS : AGDYB140

Single-edged blade similar to the SR-DIA-6150, but with a 60° cutting angle, resulting in less overcut. Pre-cut: 0.84xAP Recommended materials : • Adhesive vinyl • Corrugated plastic • Foam board (PUR) • Lenticular panel • Expanded PVC (Forex®, Sintra®) • Magnetic sheet • Polyester...

Identical to Z-DIA-46 but with a length of 36mm Pre-cut: 1xAPMachine compatibility and Manufacturer references :- ESKO : BLD-SF246, G42458398

Tangential blade designed for kiss-cutting and full-cutting of adhesive vinyls. Precise depth control Accurate cuts for easy weeding Cuts a wide variety of vinyl Recommended materials: • Paper Machine compatibility and Manufacturer references :- SUMMA : 390-550

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.). Also recommended for Dibond© type TAC and ACM Cuts out and chamfers the material as a single operation. CAUTION: ensure that the material is flat! Uncoated cutter; lubrication...