Milling
-
Family 4041 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK.## Cutters for slot cutting - folding Specially designed for ACM and TAC ( Dibond©, Alucobond© ) Very good surface finish. Improves the evacuation of chips. Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal...4041 TYPE ZUND - Conical, one-tooth cutters for cutting slots - folding with ring - Zund machine compatible
- Regular price
- From 49,58 €
-
Family 4030 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Compression cutters for the contour milling of wooden boards The double-helix configuration - producing an upcut at the tip and then a downcut - prevents delamination of the two faces of the material The cutting geometry allows...4030 TYPE ZUND - Coated compression cutters with ring - WOODSPEED - Zund machine compatible
- Regular price
- From 69,25 €
-
Family 4023 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Uncoated cutter, lubrication recommended. Lead time: 48 hours4023 TYPE ZUND - Ringed single-tooth cutters with right-hand helix for aluminium Zund machine compatible
- Regular price
- From 35,22 €
-
Family 4022 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Downcut tool, downwards removal of chips Workpieces held better due to the downwards force. Limits the delamination of the upper...4022 TYPE ZUND - Ringed single-tooth cutters with left-hand helix for aluminium Zund machine compatible
- Regular price
- From 35,22 €
-
Family 4015 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Cutters derived from the 4013 but with two teeth Smooth and polished flute, limited built-up edge effects Improves the surface finish when used on foamed materials and woods compared with a one-flute cutter. Upcut tool, upwards removal...4015 TYPE ZUND - Ringed two-tooth cutters with right-hand helix Zund machine compatible
- Regular price
- From 43,70 €
-
Family 4014 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Cutters derived from the 4012 but with two teeth Smooth and polished flute, limited built-up edge effects Improves the surface finish when used on foamed materials and woods compared with a one-flute cutter. Downcut tool, downwards removal...4014 TYPE ZUND - Ringed two-tooth cutters with left-hand helix Zund machine compatible
- Regular price
- From 34,65 €
-
Family 4013S TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Cutters derived from the 4013 but with flat for finish Smooth and polished flute, limited built-up edge effects Improves the surface finish at the bottom of the pocket Upcut tool, upwards removal of chips. Lead time: 48...4013S TYPE ZUND - Ringed single-tooth cutters, with right-hand helix with flat for finish Zund machine compatible
- Regular price
- From 33,94 €
-
Family 4012 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Versatile range Smooth and polished flute, limited built-up edge effects Downcut tool, downwards removal of chips Workpieces held better due to the downwards force. Limits the delamination of the upper face, Suited to thin materials, Milling thermoformed...4012 TYPE ZUND - Single-tooth cutters with left-hand helix with ring Zund machine compatible
- Regular price
- From 31,44 €
-
Family 4003 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Two-flute cutters for non-ferrous metals with a small protective chamfer Smooth and polished flute, limited built-up edge effects Cuts slots in certain plastics, resins, compact laminates and Corian®. Improves surface finishes at the bottom of a pocket....4003 TYPE ZUND - Two-tooth cutters for cutting slots with ring in non-ferrous Zund machine compatible
- Regular price
- From 46,18 €
-
Family 4002 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type TAC and ACM Smooth and polished flute, limited built-up edge effects Coated cutter, for use without lubrication, Lead time: 48 hours4002 TYPE ZUND - Ringed single-tooth stub cutters with left-hand helix for aluminium Zund machine compatible
- Regular price
- From 40,13 €
-
Family 4001 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type TAC and ACM. Smooth and polished flute, limited built-up edge effects. Upcut tool, upwards removal of chips. Stub cutter series, high rigidity Improves...4001 TYPE ZUND - Ringed single-tooth stub cutters with right-hand helix for aluminium Zund machine compatible
- Regular price
- From 31,44 €
-
Family 4013 TYPE ZUNDZUND TYPPED MILLS, RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The most versatile range. Smooth and polished flute, limited built-up edge effects. Upcut tool, upwards chip removal : Chips evacuated efficiently. The most commonly used. When possible, select short cutters (cutting length = 2...4013 TYPE ZUND - Single-tooth cutters with right-hand helix with ring Zund machine compatible
- Regular price
- From 28,63 €
-
Family 4045Creasing cutter - special high speed bending ACM, TAC (DIBOND, ALUCOBOND) Very good surface condition Improved chip evacuation High working speed Propeller on the right, rising chips Coating on request Machining of non-ferrous materials with coolant or coating4045 - High speed two-tooth conical creasing - folding cutter
- Regular price
- From 87,34 €
-
Family 4100Geometry specially designed to shear fibres (Kevlar / Aramide, etc.) Also perfectly suited to thin plywood AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at the end of the usual reference. Example: Standard part no. without...4100 - Two-tooth cutters for cutting profiles and slots in fibrous materials (kevlar / Aramide, etc.)
- Regular price
- From 56,55 €
-
Family 4060Range specifically for foamed materials and wood Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at the end of the usual reference....4060 - Three-tooth cutters for foamed materials and wood
- Regular price
- From 43,60 €
-
Family 4022XRange specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Downcut tool, downwards removal of chips Workpieces held better due to the downwards force. Limits the delamination of the upper face. Suited to thin materials. Milling thermoformed...4022X - Single-tooth cutters with left-hand helix for aluminium
- Regular price
- From 28,36 €
-
Family 4003Two-flute cutters for non-ferrous metals with a small protective chamfer Smooth and polished flute, limited built-up edge effects Cuts slots in certain plastics, resins, compact laminates and Corian®. Improves surface finishes at the bottom of a pocket. Coating on demand AVAILABLE IN RINGED VERSION...4003 - Two-tooth cutters for cutting slots in non-ferrous
- Regular price
- From 38,18 €
-
Family 4202Range specifically for plastics Cuts out and chamfers the material as a single operation CAUTION: Ensure that the material is flat!4202 - Single-tooth cutters with chamfer for plastics
- Regular price
- From 48,30 €
-
Family 4110Slitting saw cutters with carbide inserts on a steel shank Machining of slots and slits Cutting out thermoformed parts4110 - Slitting saw cutters on a shank
- Regular price
- From 124,67 €
Les fraises carbure de Diager Industrie sont des outils de coupe de haute qualité, fabriqués à partir de carbure de tungstène ultra-résistant. Leur conception précise et leur revêtement spécial garantissent une durabilité exceptionnelle et une performance de coupe optimale. Ces fraises sont utilisées dans une variété d'applications telles que l'usinage de métaux, le travail du bois, la gravure, le plastique et bien plus encore. Leur géométrie spéciale permet une évacuation efficace des copeaux, assurant des résultats propres et précis. En somme, les fraises carbure de Diager Industrie sont des outils polyvalents et fiables, adaptés à une multitude de tâches d'usinage et de coupe dans divers domaines industriels et artisanaux.
DÉCOUVREZ TOUS LES TYPES DE MATÉRIAUX USINÉS PAR NOS FRAISES CARBURE :
- Découpe et usinage des plastiques
- Découpe et usinage des aluminiums
- Découpe et usinage du bois
- Découpe et usinage du Dibond®
- Découpe et usinage du Corian
- Découpe et usinage du HPL et Trespa
- Découpe et usinage de mousses
- Découpe et usinage du caoutchouc
- Découpe et usinage des aciers
- Découpe et usinage du Kevlar®
- Découpe et usinage du Fenix®
- Découpe et usinage du PVC alvéolaire
- Découpe et usinage de l’Akilux®
- … et bien d’autres matériaux spécialisés