RINGED VERSION FOR TOOLS WITH Ø6 SHANK. 2-tooth milling cutter specifically for soft plastics: PVC, PP, PEHD, Foamlite, Nylon, … Polyglazed flute and sharpening, limited chip sticking. High cutting speed. Quality surface finish on edges and pocket bottom. Right-hand helix, rising chips.

Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Downcut tool, downwards removal of chips Workpieces held better due to the downwards force. Limits the delamination of the upper face. Suited to thin materials. Milling thermoformed...

Range specifically for plastics Cuts out and chamfers the material as a single operation CAUTION: Ensure that the material is flat!

Right hand cut Right-handed helix 25° Number of teeth 4 Clearance 7° Cut 5° Carbide MK15 **Cylindrical attachment, flat on request

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.). Also recommended for Dibond© type TAC and ACM Cuts out and chamfers the material as a single operation. CAUTION: ensure that the material is flat! Uncoated cutter; lubrication...

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Cutters derived from the 4013 but with two teeth Smooth and polished flute, limited built-up edge effects Improves the surface finish when used on foamed materials and woods compared with a one-flute cutter. Upcut tool, upwards removal...

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type TAC and ACM Smooth and polished flute, limited built-up edge effects Coated cutter, for use without lubrication, Lead time: 48 hours

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type TAC and ACM Smooth and polished flute, limited built-up edge effects Coated cutter, for use without lubrication, Lead time: 48 hours

Creasing cutter - special high speed bending ACM, TAC (DIBOND, ALUCOBOND) Very good surface condition Improved chip evacuation High working speed Propeller on the right, rising chips Coating on request Machining of non-ferrous materials with coolant or coating

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Straight-fluted cutters No chip removal direction. Used mainly for wood. This cutter may also be used to produce a finished surface on certain thermoplastics, with a final cut of a few hundredths of a millimetre. Lead time:...

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Geometry specially designed to shear fibres (Kevlar / Aramide, etc.) Also perfectly suited to thin plywood Lead time: 48 hours

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for foamed materials and wood Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Lead time: 48 hours

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for HPL (Trespa©, Fundermax©) Upcut tool, upwards removal of chips Chip breaker to improve ventilation and reduce heating. Coating on demand. The use of a coating extends the service life (consult us for details). Lead...

RINGED VERSION FOR TOOLS WITH Ø6 SHANK.## Cutters for slot cutting - folding Specially designed for ACM and TAC ( Dibond©, Alucobond© ) Very good surface finish. Improves the evacuation of chips. Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal...

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Compression cutters for the contour milling of wooden boards The double-helix configuration - producing an upcut at the tip and then a downcut - prevents delamination of the two faces of the material The cutting geometry allows...

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Uncoated cutter, lubrication recommended. Lead time: 48 hours

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Downcut tool, downwards removal of chips Workpieces held better due to the downwards force. Limits the delamination of the upper...

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Cutters derived from the 4012 but with two teeth Smooth and polished flute, limited built-up edge effects Improves the surface finish when used on foamed materials and woods compared with a one-flute cutter. Downcut tool, downwards removal...

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Cutters derived from the 4013 but with flat for finish Smooth and polished flute, limited built-up edge effects Improves the surface finish at the bottom of the pocket Upcut tool, upwards removal of chips. Lead time: 48...

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Two-flute cutters for non-ferrous metals with a small protective chamfer Smooth and polished flute, limited built-up edge effects Cuts slots in certain plastics, resins, compact laminates and Corian®. Improves surface finishes at the bottom of a pocket....