Familles C'PRINT
-
Family 4023 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Uncoated cutter, lubrication recommended. Lead time: 48 hours4023 TYPE ZUND - Ringed single-tooth cutters with right-hand helix for aluminium Zund machine compatible
- Regular price
- From 35,22 €
-
Family 4023NHCSpecific range for non-ferrous metals (aluminium, etc.) Right-hand helix, rising chips. Polyglazed flute and sharpening, limited chip sticking. Coated Plus version - Exists without coating This coating allows lubrication-free machining Greater resistance to abrasion. AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The...4023NHC - Two-tooth cutters with left-hand helix
- Regular price
- From 25,56 €
-
Family 4023XSpecific range for non-ferrous metals (aluminium, etc.) Right-hand helix, rising chips. Polyglazed flute and sharpening, limited chip sticking. Standard coated version - Available uncoated This coating allows lubrication-free machining AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a...4023X - Two-tooth cutters with left-hand helix
- Regular price
- From 26,25 €
-
Family 4030Compression cutters for the contour milling of wooden boards The double-helix configuration - producing an upcut at the tip and then a downcut - prevents delamination of the two faces of the material The cutting geometry allows high-speed machining and a perfect surface finish....4030 - Coated compression cutters - WOODSPEED
- Regular price
- From 61,25 €
-
Family 4030 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Compression cutters for the contour milling of wooden boards The double-helix configuration - producing an upcut at the tip and then a downcut - prevents delamination of the two faces of the material The cutting geometry allows...4030 TYPE ZUND - Coated compression cutters with ring - WOODSPEED - Zund machine compatible
- Regular price
- From 69,25 €
-
Family 4041Cutters for slot cutting - folding Specially designed for ACM and TAC ( Dibond©, Alucobond© ) Very good surface finish. Improves the evacuation of chips. Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Coating on demand. Machining of...4041 - Conical, one-tooth cutters for cutting slots - folding
- Regular price
- From 41,58 €
-
Family 4041 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK.## Cutters for slot cutting - folding Specially designed for ACM and TAC ( Dibond©, Alucobond© ) Very good surface finish. Improves the evacuation of chips. Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal...4041 TYPE ZUND - Conical, one-tooth cutters for cutting slots - folding with ring - Zund machine compatible
- Regular price
- From 49,58 €
-
Family 4045Creasing cutter - special high speed bending ACM, TAC (DIBOND, ALUCOBOND) Very good surface condition Improved chip evacuation High working speed Propeller on the right, rising chips Coating on request Machining of non-ferrous materials with coolant or coating4045 - High speed two-tooth conical creasing - folding cutter
- Regular price
- From 87,34 €
-
Family 4050Range specifically for HPL (Trespa©, Fundermax©) Upcut tool, upwards removal of chips Chip breaker to improve ventilation and reduce heating. Coating on demand. The use of a coating extends the service life (consult us for details). AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6...4050 - Three-tooth cutters for high-pressure laminates (HPL)
- Regular price
- From 53,50 €
-
Family 4050 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for HPL (Trespa©, Fundermax©) Upcut tool, upwards removal of chips Chip breaker to improve ventilation and reduce heating. Coating on demand. The use of a coating extends the service life (consult us for details). Lead...4050 TYPE ZUND - Three-tooth cutters with ring for high-pressure laminates (HPL) Zund machine compatible
- Regular price
- 61,50 €
-
Family 40522-tooth milling cutter specifically for soft plastics: PVC, PP, PEHD, Foamlite, Nylon, … Polyglazed flute and sharpening, limited chip sticking. High cutting speed. Quality surface finish on edges and pocket bottom. Right-hand helix, rising chips.4052 - 2-tooth milling cutter for soft plastics
- Regular price
- From 30,50 €
-
Family 4052 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. 2-tooth milling cutter specifically for soft plastics: PVC, PP, PEHD, Foamlite, Nylon, … Polyglazed flute and sharpening, limited chip sticking. High cutting speed. Quality surface finish on edges and pocket bottom. Right-hand helix, rising chips.4052 TYPE ZUND - 2-tooth milling cutter for soft plastics
- Regular price
- From 46,20 €
-
Family 4053This range’s geometry has been specially developed to produce a better surface finish in PMMA, Polycarbonate, PA6, Corian and Compact laminates. Smooth and polished flute, limited built-up edge effects. Upcut tool, upwards removal of chips More resistant to abrasion. When possible, select short cutters...4053 - Single-tooth, high-efficiency cutters
- Regular price
- From 20,30 €
-
Family 4053 TYPE ZUNDRINGED VERSION FOR Ø6 SHANK TOOLS This range’s geometry has been specially developed to produce a better surface finish in PMMA, Polycarbonate, PA6, Corian and Compact laminates. Smooth and polished flute, limited built-up edge effects. Upcut tool, upwards removal of chips More resistant to...4053 TYPE ZUND - Single-tooth, high-efficiency cutters with ring Zund machine compatible
- Regular price
- From 38,35 €
-
Family 4060Range specifically for foamed materials and wood Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at the end of the usual reference....4060 - Three-tooth cutters for foamed materials and wood
- Regular price
- From 43,60 €
-
Family 4060 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for foamed materials and wood Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Lead time: 48 hours4060 TYPE ZUND - Three-tooth cutters with ring for foamed materials and wood Zund machine compatible
- Regular price
- 51,60 €
-
Family 4061Gamme spécifique pour les mousses en version longue. Fraisage et rainurage dans les mousses Polyéthylènes, élastomère thermoplastique, polyvinyle…. ainsi que le PVC expansé. Goujure et affûtage polyglaces, collage copeaux limité. Hélice à droite, copeaux remontants.4061 - Fraise 3 dents longue pour mousse
- Regular price
- From 35,59 €
-
Family 4070Conical, multi-material engraving cutters AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at the end of the usual reference. Example: Standard part no. without ring: 4070--06P0050-030 Part no. with ring: 4070--06P0050-030-B Lead time: 48 hours4070 - Conical engraving cutters
- Regular price
- From 23,76 €
-
Family 4070 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Conical, multi-material engraving cutters Lead time: 48 hours4070 TYPE ZUND - Conical engraving cutters with ring Zund machine compatible
- Regular price
- 42,78 €
-
Family 4100 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Geometry specially designed to shear fibres (Kevlar / Aramide, etc.) Also perfectly suited to thin plywood Lead time: 48 hours4100 TYPE ZUND - Two-tooth cutters for cutting profiles and slots in fibrous materials with ring Zund machine compatible
- Regular price
- From 74,15 €
