Grooving
-
Family 4120Straight-fluted cutters No chip removal direction. Used mainly for wood. This cutter may also be used to produce a finished surface on certain thermoplastics, with a final cut of a few hundredths of a millimetre. AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK....4120 - Straight, two-tooth cutters
- Regular price
- From 42,36 €
-
Family 4041Cutters for slot cutting - folding Specially designed for ACM and TAC ( Dibond©, Alucobond© ) Very good surface finish. Improves the evacuation of chips. Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Coating on demand. Machining of...4041 - Conical, one-tooth cutters for cutting slots - folding
- Regular price
- From 41,58 €
-
Family 4023XSpecific range for non-ferrous metals (aluminium, etc.) Right-hand helix, rising chips. Polyglazed flute and sharpening, limited chip sticking. Standard coated version - Available uncoated This coating allows lubrication-free machining AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a...4023X - Two-tooth cutters with left-hand helix
- Regular price
- From 26,25 €
-
Family 4080Face milling cutters (Face milling on martyr plates, etc.)4080 - Face milling cutters
- Regular price
- From 117,40 €
-
Family 4120 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Straight-fluted cutters No chip removal direction. Used mainly for wood. This cutter may also be used to produce a finished surface on certain thermoplastics, with a final cut of a few hundredths of a millimetre. Lead time:...4120 TYPE ZUND - Straight, two-tooth cutters with ring Zund machine compatible
- Regular price
- From 0,00 €
-
Family 4203 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.). Also recommended for Dibond© type TAC and ACM Cuts out and chamfers the material as a single operation. CAUTION: ensure that the material is flat! Uncoated cutter; lubrication...4203 TYPE ZUND - Ringed single-tooth cutter with chamfer for aluminum Zund machine compatible
- Regular price
- From 50,50 €
-
Family 4001X TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type ACM and TAC Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Stub cutter series, high rigidity Improves...4001X TYPE ZUND - Coated, ringed single-tooth stub cutters with right-hand helix for aluminium Zune machine compatible
- Regular price
- From 37,54 €
-
Family 4001NHC TYPE ZUNDRINGED CUTTER FOR ZÜND WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type ACM and TAC Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Stub cutter series, high rigidity Improves...4001NHC TYPE ZUND - Coated, ringed single-tooth stub cutters with right-hand helix for aluminium Zund machine compatible
- Regular price
- From 40,10 €
-
Family 4100 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Geometry specially designed to shear fibres (Kevlar / Aramide, etc.) Also perfectly suited to thin plywood Lead time: 48 hours4100 TYPE ZUND - Two-tooth cutters for cutting profiles and slots in fibrous materials with ring Zund machine compatible
- Regular price
- From 74,15 €
-
Family 4060 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for foamed materials and wood Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Lead time: 48 hours4060 TYPE ZUND - Three-tooth cutters with ring for foamed materials and wood Zund machine compatible
- Regular price
- From 51,60 €
-
Family 4053 TYPE ZUNDRINGED VERSION FOR Ø6 SHANK TOOLS This range’s geometry has been specially developed to produce a better surface finish in PMMA, Polycarbonate, PA6, Corian and Compact laminates. Smooth and polished flute, limited built-up edge effects. Upcut tool, upwards removal of chips More resistant to...4053 TYPE ZUND - Single-tooth, high-efficiency cutters with ring Zund machine compatible
- Regular price
- From 38,35 €
-
Family 4052 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. 2-tooth milling cutter specifically for soft plastics: PVC, PP, PEHD, Foamlite, Nylon, … Polyglazed flute and sharpening, limited chip sticking. High cutting speed. Quality surface finish on edges and pocket bottom. Right-hand helix, rising chips.4052 TYPE ZUND - 2-tooth milling cutter for soft plastics
- Regular price
- From 46,20 €
-
Family 4050 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for HPL (Trespa©, Fundermax©) Upcut tool, upwards removal of chips Chip breaker to improve ventilation and reduce heating. Coating on demand. The use of a coating extends the service life (consult us for details). Lead...4050 TYPE ZUND - Three-tooth cutters with ring for high-pressure laminates (HPL) Zund machine compatible
- Regular price
- From 61,50 €
-
Family 4041 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK.## Cutters for slot cutting - folding Specially designed for ACM and TAC ( Dibond©, Alucobond© ) Very good surface finish. Improves the evacuation of chips. Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal...4041 TYPE ZUND - Conical, one-tooth cutters for cutting slots - folding with ring - Zund machine compatible
- Regular price
- From 49,58 €
-
Family 4030 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Compression cutters for the contour milling of wooden boards The double-helix configuration - producing an upcut at the tip and then a downcut - prevents delamination of the two faces of the material The cutting geometry allows...4030 TYPE ZUND - Coated compression cutters with ring - WOODSPEED - Zund machine compatible
- Regular price
- From 69,25 €
-
Family 4023 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Uncoated cutter, lubrication recommended. Lead time: 48 hours4023 TYPE ZUND - Ringed single-tooth cutters with right-hand helix for aluminium Zund machine compatible
- Regular price
- From 35,22 €
-
Family 4022 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Downcut tool, downwards removal of chips Workpieces held better due to the downwards force. Limits the delamination of the upper...4022 TYPE ZUND - Ringed single-tooth cutters with left-hand helix for aluminium Zund machine compatible
- Regular price
- From 35,22 €
-
Family 4015 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Cutters derived from the 4013 but with two teeth Smooth and polished flute, limited built-up edge effects Improves the surface finish when used on foamed materials and woods compared with a one-flute cutter. Upcut tool, upwards removal...4015 TYPE ZUND - Ringed two-tooth cutters with right-hand helix Zund machine compatible
- Regular price
- From 43,70 €
-
Family 4014 TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Cutters derived from the 4012 but with two teeth Smooth and polished flute, limited built-up edge effects Improves the surface finish when used on foamed materials and woods compared with a one-flute cutter. Downcut tool, downwards removal...4014 TYPE ZUND - Ringed two-tooth cutters with left-hand helix Zund machine compatible
- Regular price
- From 34,65 €
-
Family 4013S TYPE ZUNDRINGED VERSION FOR TOOLS WITH Ø6 SHANK. Cutters derived from the 4013 but with flat for finish Smooth and polished flute, limited built-up edge effects Improves the surface finish at the bottom of the pocket Upcut tool, upwards removal of chips. Lead time: 48...4013S TYPE ZUND - Ringed single-tooth cutters, with right-hand helix with flat for finish Zund machine compatible
- Regular price
- From 33,94 €
Les fraises Diager Industrie sont idéales pour le rainurage de divers matériaux. Leur conception robuste et leur géométrie de coupe précise permettent d'obtenir des rainures nettes et uniformes, qu'il s'agisse de métaux, de bois, de plastiques ou de composites. Avec les fraises Diager, le rainurage devient rapide, précis et efficace, offrant des résultats de qualité professionnelle pour une large gamme d'applications industrielles et artisanales.
DÉCOUVREZ TOUS LES TYPES DE MATÉRIAUX USINÉS PAR NOS FRAISES CARBURE :
- Découpe et usinage des plastiques
- Découpe et usinage des aluminiums
- Découpe et usinage du bois
- Découpe et usinage du Dibond®
- Découpe et usinage du Corian
- Découpe et usinage du HPL et Trespa
- Découpe et usinage de mousses
- Découpe et usinage du caoutchouc
- Découpe et usinage des aciers
- Découpe et usinage du Kevlar®
- Découpe et usinage du Fenix®
- Découpe et usinage du PVC alvéolaire
- Découpe et usinage de l’Akilux®
- … et bien d’autres matériaux spécialisés