Fraises
-
Family 4053This range’s geometry has been specially developed to produce a better surface finish in PMMA, Polycarbonate, PA6, Corian and Compact laminates. Smooth and polished flute, limited built-up edge effects. Upcut tool, upwards removal of chips More resistant to abrasion. When possible, select short cutters...4053 - Single-tooth, high-efficiency cutters
- Regular price
- From 20,30 €
-
Family 4001XRange specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type ACM and TAC Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Stub cutter series, high rigidity Improves surface finishes, Longer service life of the...4001X - Coated, single-tooth stub cutters with right-hand helix for aluminium
- Regular price
- From 23,70 €
-
Family 4013The most versatile range. Smooth and polished flute, limited built-up edge effects. Upcut tool, upwards chip removal : Chips evacuated efficiently. The most commonly used. When possible, select short cutters (cutting length = 2 x Ø): Improves surface finishes, Longer service life of the...4013 - Single-tooth cutters with right-hand helix
- Regular price
- From 16,85 €
-
Family 4012Versatile range Smooth and polished flute, limited built-up edge effects Downcut tool, downwards removal of chips Workpieces held better due to the downwards force. Limits the delamination of the upper face, Suited to thin materials, Milling thermoformed parts on CNC robots, reduction of vibrations....4012 - Single-tooth cutters with left-hand helix
- Regular price
- From 16,85 €
-
Family 4030Compression cutters for the contour milling of wooden boards The double-helix configuration - producing an upcut at the tip and then a downcut - prevents delamination of the two faces of the material The cutting geometry allows high-speed machining and a perfect surface finish....4030 - Coated compression cutters - WOODSPEED
- Regular price
- From 61,25 €
-
Family 4023NHCSpecific range for non-ferrous metals (aluminium, etc.) Right-hand helix, rising chips. Polyglazed flute and sharpening, limited chip sticking. Coated Plus version - Exists without coating This coating allows lubrication-free machining Greater resistance to abrasion. AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The...4023NHC - Two-tooth cutters with left-hand helix
- Regular price
- From 25,56 €
-
Family 4002Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type TAC and ACM Smooth and polished flute, limited built-up edge effects Coated cutter, for use without lubrication, AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring...4002 - Single-tooth stub cutters with left-hand helix for aluminium
- Regular price
- From 30,02 €
-
Family 4070Conical, multi-material engraving cutters AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at the end of the usual reference. Example: Standard part no. without ring: 4070--06P0050-030 Part no. with ring: 4070--06P0050-030-B Lead time: 48 hours4070 - Conical engraving cutters
- Regular price
- From 23,76 €
-
Family 4001NHCRange specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type ACM and TAC Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Stub cutter series, high rigidity Improves surface finishes, Longer service life of the...4001NHC - Coated, single-tooth stub cutters with right-hand helix for aluminium
- Regular price
- From 24,14 €
-
Family 4015Cutters derived from the 4013 but with two teeth Smooth and polished flute, limited built-up edge effects Improves the surface finish when used on foamed materials and woods compared with a one-flute cutter. Upcut tool, upwards removal of chips. AVAILABLE IN RINGED VERSION FOR...4015 - Two-tooth cutters with right-hand helix
- Regular price
- From 26,11 €
-
Family 2352XCoated, three-flute cutters for machining metals Particularly suited to the machining of steel-faced composite panels (such as Steelbond© or Kömasteel©). AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at the end of the usual reference. Example:...2352X - Coated, three-tooth cutters for steel
- Regular price
- From 38,65 €
-
Family 4023Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Uncoated cutter, lubrication recommended. AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at...4023 - Single-tooth cutters with right-hand helix for aluminium
- Regular price
- From 20,52 €
-
Family 4014Cutters derived from the 4012 but with two teeth Smooth and polished flute, limited built-up edge effects Improves the surface finish when used on foamed materials and woods compared with a one-flute cutter. Downcut tool, downwards removal of chips Workpieces held better due...4014 - Two-tooth cutters with left-hand helix
- Regular price
- From 26,11 €
-
Family 2345**Multi-material **and multi-application technical solid carbide cutter Variables helixes and staggered teeth Coated : AlCrN-C Right-handed helix : 37° and 40° 4 teeth, 2 of which are "overlapping"2345 - 4-teeth coated milling cutter
- Regular price
- From 21,02 €
-
Family 4013SCutters derived from the 4013 but with flat for finish Smooth and polished flute, limited built-up edge effects Improves the surface finish at the bottom of the pocket Upcut tool, upwards removal of chips. AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The...4013S - Single-tooth cutters with right-hand helix with flat for finish
- Regular price
- From 25,94 €
-
Family 4001Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type TAC and ACM. Smooth and polished flute, limited built-up edge effects. Upcut tool, upwards removal of chips. Stub cutter series, high rigidity Improves surface finishes, Longer service life of the...4001 - Single-tooth stub cutters with right-hand helix for aluminium
- Regular price
- From 17,60 €
-
Family 2340Right hand cut Right-handed helix 25° Number of teeth 4 Clearance 7° Cut 5° Carbide MK15 **Cylindrical attachment, flat on request2340 - 2 flutes end mill Solid Carbide
- Regular price
- From 23,42 €
-
Family 4050Range specifically for HPL (Trespa©, Fundermax©) Upcut tool, upwards removal of chips Chip breaker to improve ventilation and reduce heating. Coating on demand. The use of a coating extends the service life (consult us for details). AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6...4050 - Three-tooth cutters for high-pressure laminates (HPL)
- Regular price
- From 53,50 €
-
Family 4044Very good surface finish solid carbide, High rigidity AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at the end of the usual reference. Example: Standard part no. without ring: 4044--10P0020-090 Part no. with ring: 4044--10P0020-090-B Lead...4044 - Cutters for slot cutting - folding - chamfering
- Regular price
- From 81,50 €
-
Family 4022Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Downcut tool, downwards removal of chips Workpieces held better due to the downwards force. Limits the delamination of the upper face. Suited to thin materials. Milling thermoformed...4022 - Single-tooth cutters with left-hand helix for aluminium
- Regular price
- From 20,52 €
Les fraises d'usinage de Diager Industrie offrent une précision et une efficacité remarquables dans diverses applications industrielles. Leur conception innovante permet des coupes nettes et rapides, améliorant la productivité et la qualité des pièces usinées. Que ce soit pour le fraisage de métaux, de plastiques ou de composites, les fraises Diager Industrie sont des outils fiables et performants, répondant aux besoins les plus exigeants des professionnels de l'usinage.
DÉCOUVREZ TOUS LES TYPES DE MATÉRIAUX USINÉS PAR NOS FRAISES CARBURE :
- Découpe et usinage des plastiques
- Découpe et usinage des aluminiums
- Découpe et usinage du bois
- Découpe et usinage du Dibond®
- Découpe et usinage du Corian
- Découpe et usinage du HPL et Trespa
- Découpe et usinage de mousses
- Découpe et usinage du caoutchouc
- Découpe et usinage des aciers
- Découpe et usinage du Kevlar®
- Découpe et usinage du Fenix®
- Découpe et usinage du PVC alvéolaire
- Découpe et usinage de l’Akilux®
- … et bien d’autres matériaux spécialisés