Cutters for cutting slots - folding Specially designed for ACM and TAC ( Dibond©, Alucobond© ) Coating on demand.

Cutters derived from the 4012 but with two teeth Smooth and polished flute, limited built-up edge effects Improves the surface finish when used on foamed materials and woods compared with a one-flute cutter. Downcut tool, downwards removal of chips ­ Workpieces held better due...

RINGED CUTTER FOR ZÜND WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type ACM and TAC Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Stub cutter series, high rigidity Improves...

Very good surface finish solid carbide, High rigidity AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at the end of the usual reference. Example: Standard part no. without ring: 4044--10P0020-090 Part no. with ring: 4044--10P0020-090-B Lead...

Coated, three-flute cutters for machining metals Particularly suited to the machining of steel-faced composite panels (such as Steelbond© or Kömasteel©). AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at the end of the usual reference. Example:...

Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Downcut tool, downwards removal of chips Workpieces held better due to the downwards force. Limits the delamination of the upper face. Suited to thin materials. Milling thermoformed...

Specific range for non-ferrous metals (aluminium, etc.) Right-hand helix, rising chips. Polyglazed flute and sharpening, limited chip sticking. Standard coated version - Available uncoated This coating allows lubrication-free machining AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a...

**Multi-material **and multi-application technical solid carbide cutter Variables helixes and staggered teeth Coated : AlCrN-C Right-handed helix : 37° and 40° 4 teeth, 2 of which are "overlapping"

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type ACM and TAC Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Stub cutter series, high rigidity Improves...

RINGED VERSION FOR Ø6 SHANK TOOLS This range’s geometry has been specially developed to produce a better surface finish in PMMA, Polycarbonate, PA6, Corian and Compact laminates. Smooth and polished flute, limited built-up edge effects. Upcut tool, upwards removal of chips More resistant to...

Brazed carbide insert drill bit 6° cut 90° tip angle Right cutting : 6° Sharpening : AF1 Body : High-speed steel - Carbide insert K20

Right hand cut Right-handed helix 25° Number of lips 2 Sharpening AF1 Carbide MK15 Cylindrical attachment

Creasing cutter - special high speed bending ACM, TAC (DIBOND, ALUCOBOND) Very good surface condition Improved chip evacuation High working speed Propeller on the right, rising chips Coating on request Machining of non-ferrous materials with coolant or coating

Range specifically for foamed materials and wood Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at the end of the usual reference....

Identical to Z-DIA-11 but with a length of 25mm Pre-cut: 0.58xAP Post-cut: 0.58xAPMachine compatibility and Manufacturer references :- ESKO : BLD-DF113, G42443036- SUMMA : 500-9803- BLACKMAN & WHITE : BW113

Range specifically for non-ferrous metals (aluminium, brass, copper, etc.). Also recommended for Dibond© type TAC and ACM Cuts out and chamfers the material as a single operation. CAUTION: ensure that the material is flat! Uncoated cutter; lubrication is strongly recommended when used on aluminium....

Straight-fluted cutters No chip removal direction. Used mainly for wood. This cutter may also be used to produce a finished surface on certain thermoplastics, with a final cut of a few hundredths of a millimetre. AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK....

RINGED VERSION FOR TOOLS WITH Ø6 SHANK. Versatile range Smooth and polished flute, limited built-up edge effects Downcut tool, downwards removal of chips Workpieces held better due to the downwards force. Limits the delamination of the upper face, Suited to thin materials, Milling thermoformed...

Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Downcut tool, downwards removal of chips Coated Plus version - Exists without coating This coating allows lubrication-free machining Greater resistance to abrasion. AVAILABLE IN RINGED VERSION FOR...

Specifically designed for harder materials (PMMA, Corian, polycarbonates, hardwoods, etc.)