Métaux
-
Family 4053This range’s geometry has been specially developed to produce a better surface finish in PMMA, Polycarbonate, PA6, Corian and Compact laminates. Smooth and polished flute, limited built-up edge effects. Upcut tool, upwards removal of chips More resistant to abrasion. When possible, select short cutters...4053 - Single-tooth, high-efficiency cutters
- Regular price
- From 20,30 €
-
Family 4001XRange specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type ACM and TAC Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Stub cutter series, high rigidity Improves surface finishes, Longer service life of the...4001X - Coated, single-tooth stub cutters with right-hand helix for aluminium
- Regular price
- From 23,70 €
-
Family 2409Brazed carbide insert drill bit 6° cut 118° tip angle short series Right cutting : 6° Sharpening : AF1 Body : High-speed steel - Carbide insert K202409 - Brazed carbide insert drill short series 118° tip angle - Ø1,5 to Ø9,9
- Regular price
- From 12,73 €
-
Family 4023NHCSpecific range for non-ferrous metals (aluminium, etc.) Right-hand helix, rising chips. Polyglazed flute and sharpening, limited chip sticking. Coated Plus version - Exists without coating This coating allows lubrication-free machining Greater resistance to abrasion. AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The...4023NHC - Two-tooth cutters with left-hand helix
- Regular price
- From 25,56 €
-
Family 4002Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type TAC and ACM Smooth and polished flute, limited built-up edge effects Coated cutter, for use without lubrication, AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring...4002 - Single-tooth stub cutters with left-hand helix for aluminium
- Regular price
- From 30,02 €
-
Family 4070Conical, multi-material engraving cutters AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at the end of the usual reference. Example: Standard part no. without ring: 4070--06P0050-030 Part no. with ring: 4070--06P0050-030-B Lead time: 48 hours4070 - Conical engraving cutters
- Regular price
- From 23,76 €
-
Family 2409Brazed carbide insert drill bit 6° cut 118° tip angle short series Right cutting : 6° Sharpening : AF1 Body : High-speed steel - Carbide insert K202409 - Brazed carbide insert drill short series 118° tip angle - Ø10 to Ø20
- Regular price
- From 21,33 €
-
Family 2352XCoated, three-flute cutters for machining metals Particularly suited to the machining of steel-faced composite panels (such as Steelbond© or Kömasteel©). AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at the end of the usual reference. Example:...2352X - Coated, three-tooth cutters for steel
- Regular price
- From 38,65 €
-
Family 4023Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Uncoated cutter, lubrication recommended. AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a "-B" at...4023 - Single-tooth cutters with right-hand helix for aluminium
- Regular price
- From 20,52 €
-
Family 4001NHCRange specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type ACM and TAC Smooth and polished flute, limited built-up edge effects Upcut tool, upwards removal of chips. Stub cutter series, high rigidity Improves surface finishes, Longer service life of the...4001NHC - Coated, single-tooth stub cutters with right-hand helix for aluminium
- Regular price
- From 24,14 €
-
Family 2419Brazed carbide insert drill bit 6° cut 90° tip angle Right cutting : 6° Sharpening : AF1 Body : High-speed steel - Carbide insert K202419 - Brazed carbide insert drill short series 90° tip angle
- Regular price
- From 21,42 €
-
Family 2345**Multi-material **and multi-application technical solid carbide cutter Variables helixes and staggered teeth Coated : AlCrN-C Right-handed helix : 37° and 40° 4 teeth, 2 of which are "overlapping"2345 - 4-teeth coated milling cutter
- Regular price
- From 21,02 €
-
Family 2340Right hand cut Right-handed helix 25° Number of teeth 4 Clearance 7° Cut 5° Carbide MK15 **Cylindrical attachment, flat on request2340 - 2 flutes end mill Solid Carbide
- Regular price
- From 23,42 €
-
Family 4022Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Smooth and polished flute, limited built-up edge effects Downcut tool, downwards removal of chips Workpieces held better due to the downwards force. Limits the delamination of the upper face. Suited to thin materials. Milling thermoformed...4022 - Single-tooth cutters with left-hand helix for aluminium
- Regular price
- From 20,52 €
-
Family 2415Right hand cut Right-handed helix 25° Number of lips 2 Sharpening AF1 Carbide MK15 Cylindrical attachment2415 - Double-lip drill bit sold carbide - Ø0,4 to Ø7,9
- Regular price
- From 11,23 €
-
Family 4203Range specifically for non-ferrous metals (aluminium, brass, copper, etc.). Also recommended for Dibond© type TAC and ACM Cuts out and chamfers the material as a single operation. CAUTION: ensure that the material is flat! Uncoated cutter; lubrication is strongly recommended when used on aluminium....4203 - Single-tooth cutter with chamfer for aluminium
- Regular price
- From 42,50 €
-
Family 4023XSpecific range for non-ferrous metals (aluminium, etc.) Right-hand helix, rising chips. Polyglazed flute and sharpening, limited chip sticking. Standard coated version - Available uncoated This coating allows lubrication-free machining AVAILABLE IN RINGED VERSION FOR TOOLS WITH Ø6 SHANK. The reference with ring has a...4023X - Two-tooth cutters with left-hand helix
- Regular price
- From 26,25 €
-
Family 4001Range specifically for non-ferrous metals (aluminium, brass, copper, etc.) Particularly recommended for Dibond© type TAC and ACM. Smooth and polished flute, limited built-up edge effects. Upcut tool, upwards removal of chips. Stub cutter series, high rigidity Improves surface finishes, Longer service life of the...4001 - Single-tooth stub cutters with right-hand helix for aluminium
- Regular price
- From 17,60 €
-
Family 2418Brazed carbide insert drill bit 6° cut 118° tip angle long series Right cutting : 6° Sharpening : AF1 Body : High-speed steel - Carbide insert K202418 - Brazed carbide insert drill long series 118° tip angle
- Regular price
- From 19,40 €
-
Family 2340XRight hand cut Right-handed helix 25° Number of teeth 4 Clearance 7° Cut 5° Carbide MK15 **Cylindrical attachment, flat on request2340X - 2 flutes end mill Solid Carbide coated TIANLX
- Regular price
- From 32,41 €
Diager Industrie propose une large gamme d'outils pour l'usinage des métaux, alliant performance et durabilité. Nos forets et fraises sont conçus avec précision pour répondre aux exigences des professionnels de l'industrie. Diager Industrie propose des outils pour le perçage, fraisage, rainurage, la découpe des métaux tels que l'acier, l'aluminium, le cuivre, le laiton, le titane et les alliages spécifiques. Ils offrent une précision et une durabilité exceptionnelles pour les professionnels de l'industrie.
Pour en savoir plus :